AS 4349.3 Compliant · Reports Within 24 Hours

Pest Inspections Brisbane

Q: When do I receive the inspection report?

Inspection reports are delivered within 24 hours of the inspection — typically the same day for morning inspections. Reports are AS 4349.3 compliant and delivered digitally as PDF.

Q: Do I need to be present during the inspection?

You do not need to be present, but it is recommended. Being present allows us to show you any issues found and explain recommendations in person. For investment properties or pre-purchase inspections, the buyer or their representative should ideally attend.

Q: What is the difference between a building & pest inspection and a timber pest inspection?

A timber pest inspection (AS 4349.3) covers only pest-related issues — termites, borers, wood decay fungi, and timber damage. A building & pest inspection covers both structural building defects AND pest issues. For property purchase, a combined building & pest is recommended.

Licensed pest inspections using thermal imaging, Termatrac T3i radar, and moisture meters. Pre-purchase, building & pest, and timber pest inspections. Written reports delivered within 24 hours. Based in Mansfield QLD 4122 — servicing all of Brisbane.

Book an Inspection 0406 178 471

Inspection Types

Pre-Purchase Pest Inspectionfrom $280 · AS 4349.3 report

Building & Pest Inspectionfrom $380 · Combined structural + pest

Timber Pest Inspectionfrom $280 · Termites, borers, decay

Inspection Types

Types of Pest Inspections

Three inspection types to suit different needs — all conducted by licensed inspectors using thermal imaging, radar, and moisture detection. All reports are AS 4349.3 compliant and delivered within 24 hours.

Most Booked

Pre-Purchase

Pre-Purchase Pest Inspection

Conducted before property settlement to identify pest activity, termite damage, and risk factors. Essential for any Brisbane property purchase — Brisbane is in one of Australia’s highest termite-risk zones.

from $280

AS 4349.3 compliant report

Thermal imaging + Termatrac included

Report within 24 hours

Accepted by banks and conveyancers

Building & Pest

Building & Pest Inspection

Combined inspection covering both structural building defects and pest issues. The most comprehensive pre-purchase assessment. Our pest component is conducted by a licensed pest management technician independently.

from $380

Structural defects + pest combined

Licensed pest inspector for pest component

Recommended for all property purchases

Timber Pest

Timber Pest Inspection (AS 4349.3)

Comprehensive inspection for termites, wood borers, wood decay fungi, and other timber-damaging pests. Conducted in accordance with AS 4349.3:2010. Suitable for annual inspections, insurance, and body corporate requirements.

from $280

AS 4349.3:2010 standard

Covers termites, borers, wood decay fungi

Annual or pre-purchase

What We Look For

What We Inspect For

A thorough inspection covers far more than visible pests. We inspect the entire property — roof cavity, subfloor, internal rooms, external perimeter — looking for active infestations, evidence of past activity, risk conditions, and structural vulnerability. See our termite control page for in-depth termite information.

Termite Activity & Damage

Active termites, mud tubes, termite workings in timber, moisture damage indicating termite entry. Thermal imaging used to detect heat signatures behind walls.

Borers & Wood-Destroying Insects

Exit holes, bore dust (frass), wood discolouration, and structural timber damage caused by furniture beetles, powderpost beetles, and wood borers.

Wood Decay Fungi

Wet and dry rot affecting structural timber — particularly in subfloor areas, bathroom wet areas, and external timber subject to moisture exposure.

Conducive Conditions

Moisture issues, timber-to-soil contact, inadequate ventilation, landscaping against structures — conditions that increase termite risk and must be addressed as part of a pest management plan.

Inspection Process

Our Inspection Process

Every inspection follows the same rigorous process regardless of property size. Non-destructive — no drilling or damage to your property.

Step 1

External Perimeter

Inspection of all external walls, weep holes, subfloor vents, garden beds, fencing, and structures within 50m. Looking for mud tubes, termite workings, and moisture sources.

Step 2

Subfloor (if accessible)

Full subfloor inspection using torch, moisture meter, and Termatrac radar. Checking all bearers, joists, piers, and earth for termite activity, wood decay, and moisture.

Step 3

Internal Rooms

Room-by-room inspection using thermal imaging camera and moisture meter. Checking skirting boards, door frames, window reveals, wet areas, and wall cavities.

Step 4

Roof Cavity (if accessible)

Roof cavity inspection using torch and thermal imaging. All accessible roof timbers, insulation, and ceiling frames inspected for termite activity and damage.

Step 5

Written Report & Brief

Findings explained in person. Detailed written AS 4349.3 report delivered within 24 hours with photos, risk ratings, and clear recommendations.

Equipment

Equipment We Use

All inspections use non-destructive specialist equipment. No drilling, no damage. See also our termite inspection page.

Thermal Imaging

FLIR Camera

Detects heat signatures and moisture patterns behind walls and in cavities without drilling or damage.

Termatrac T3i Radar

Microwave Detection

Detects termite movement through walls, floors, and timber using microwave radar — without any contact.

Moisture Meters

Pin + Pinless

Identifies elevated moisture in timber — a key indicator of termite activity and wood decay conditions.

Reports & Documentation

Every inspection produces a detailed written report delivered digitally within 24 hours. All reports comply with AS 4349.3:2010 and are accepted by banks, conveyancers, solicitors, and insurance companies.

What’s in Every Report

Property details and date of inspection

Inspector credentials and licence number

Areas inspected and any access limitations

Evidence of active termite activity (if found)

Timber pest damage — location, extent, photos

Wood decay fungi and borer findings

Conducive conditions and risk assessment

Clear recommendations and next steps

Thermal and moisture imaging results

Inspector signature — AS 4349.3:2010 compliant

Report TurnaroundFrom inspection to your inbox

24 hrs

Accepted By

All major Australian banks and mortgage lenders

Solicitors and conveyancers

Brisbane City Council and local authorities

Body corporates and strata managers

Home and contents insurance providers

Pricing

Inspection Pricing

All inspection prices include the AS 4349.3 compliant report, thermal imaging, Termatrac radar, and moisture meter readings. No hidden extras. Request a free quote with your property address for an exact price.

Inspection Type	Standard Property	Larger Property (4+ bed)	Turnaround	AS 4349.3
Pre-Purchase Pest Inspection	$280–$350	$350–$450	24 hours	✅
Building & Pest Inspection	$380–$480	$480–$550	24 hours	✅
Timber Pest Inspection (Annual)	$280–$350	$350–$420	24 hours	✅

Prices are indicative and depend on property size and access difficulty. Exact price confirmed when booking. Termite inspection pricing guide →

FAQ

Pest Inspection FAQ

How much does a pest inspection cost in Brisbane?

Pest inspection prices in Brisbane: pre-purchase pest inspection $280–$380, building & pest inspection $380–$550, timber pest inspection (AS 4349.3) $280–$380. All include a detailed written report within 24 hours. See our termite inspection pricing guide.

How long does a pest inspection take?

A standard residential pest inspection takes 45–90 minutes depending on property size and access. Larger properties or those with difficult access (tight subfloors, complex roof cavities) may take up to 2 hours. We confirm estimated duration when booking.

When do I receive the inspection report?

Inspection reports are delivered within 24 hours — typically the same day for morning inspections. Reports are AS 4349.3 compliant and delivered as a PDF by email. Urgent pre-exchange situations can be accommodated — call 0406 178 471 to discuss same-day report turnaround.

Are your reports AS 4349.3 compliant?

Yes. All Response Pest Control timber pest inspection reports comply with AS 4349.3:2010 — the Australian Standard for inspection of buildings for timber pest activity. Reports are accepted by banks, conveyancers, solicitors, and insurance companies across Australia.

Do I need to be present during the inspection?

You don’t need to be present, but it is strongly recommended. Being on-site allows us to explain findings in person and show you any areas of concern directly. For pre-purchase inspections, the buyer or their representative should ideally attend.

What’s the difference between building & pest and timber pest?

A timber pest inspection covers only pest-related issues — termites, borers, wood decay fungi, and timber damage. A building & pest inspection covers both structural building defects AND pest issues. For any property purchase in Brisbane, a combined building & pest inspection is recommended.

Do you use thermal imaging?

Yes. All Response Pest Control inspections use thermal imaging cameras (FLIR) to detect moisture and heat signatures behind walls and in roof cavities without drilling or damage. We also use Termatrac T3i microwave radar for termite movement detection and calibrated moisture meters.

Do banks accept your inspection reports?

Yes. Our AS 4349.3 compliant timber pest inspection reports are accepted by all major Australian banks, mortgage lenders, solicitors, and conveyancers for property purchase. If you have a specific lender requirement, call 0406 178 471 before booking to confirm.

Book Your Pest Inspection Today.

AS 4349.3 Compliant · Thermal Imaging · Report Within 24 Hours · Brisbane-Wide

0406 178 471 Book an Inspection